Details
Tera44 Housing Features & Benefits
• Ductile cast iron housing with increased rib gussets
• Smooth radius bottom design to glide over rocks & obstacles
• Asymmetric housing design, for extra long tube side strength
• Bottom oil drain hole for simple fluid changes
• Integrated factory location upper control arm mount
• 3.25” x 0.25” axle tube increases strength to resist bending
and torsion with minimal weight increase (6.7lbs more than
factory tubes, 8.9lbs less than sleeved axle tubes)
• Compatible with factory JK Rubicon locker
• 100% engineered, designed, and built in the USA
• 100% new components
• No Excuses warranty - 1 year, unlimited mileage
Tera44 Assembly Features & Benefits
• Forged Heavy Duty Inner Knuckles with greater upper and lower section strength
• 1/4” Thick CNC laser cut axle brackets for extreme strength • Reinforced front trackbar mount (ties into spring pad) for greater strength • Integrated lower FlexArm skid plates
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Heavy duty ductile iron differential cover
• Axles Seals pre-installed
• Pre-installed upper control arm bushings
• Retains all JK ESP, ABS & Speedometer sensor capability
• Proper pinion angle for lifted JK applications
• Premium UV protected triple-stage powder coat process for superior corrosion resistance
• Ductile cast iron housing with increased rib gussets
• Smooth radius bottom design to glide over rocks & obstacles
• Asymmetric housing design, for extra long tube side strength
• Bottom oil drain hole for simple fluid changes
• Integrated factory location upper control arm mount
• 3.25” x 0.25” axle tube increases strength to resist bending
and torsion with minimal weight increase (6.7lbs more than
factory tubes, 8.9lbs less than sleeved axle tubes)
• Compatible with factory JK Rubicon locker
• 100% engineered, designed, and built in the USA
• 100% new components
• No Excuses warranty - 1 year, unlimited mileage
Tera44 Assembly Features & Benefits
• Forged Heavy Duty Inner Knuckles with greater upper and lower section strength
• 1/4” Thick CNC laser cut axle brackets for extreme strength • Reinforced front trackbar mount (ties into spring pad) for greater strength • Integrated lower FlexArm skid plates
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Heavy duty ductile iron differential cover
• Axles Seals pre-installed
• Pre-installed upper control arm bushings
• Retains all JK ESP, ABS & Speedometer sensor capability
• Proper pinion angle for lifted JK applications
• Premium UV protected triple-stage powder coat process for superior corrosion resistance
Additional Information
| Weight | 160.0000 |
|---|---|
| Installation Difficulty | Moderate |
| Installation Time | 0 |
| Vehicle type | Wrangler JK Unlimited 07+, Wrangler JK 07+ |
| Video | No |
