The HD forged front flip draglink has been designed to solve several front end issues with lifted JK Wranglers. The new draglink is ‘flipped’ over the knuckle, and uses a new tapered insert to mount the draglink into the knuckle. The HD draglink is 50% stronger than the factory draglink to hep eliminate front end shimmy and other alignment issues. The forged draglink will thread into the factory adjusting sleeve. This draglink is designed to work with lifts over 4″. The kit also includes a frame side trackbar drop bracket to keep steering geometry correct, and a frame brace strengthens the frame to further reduce any front end shimmy or excess movement.
Welding is required.
Check our our Online Catalog for more information or contact one of our Preferred Dealers in your area to order your kit today!
Click here to download the Installation Instructions in PDF Format.
March 10th, 2009 at 11:14 am
I have an 07 JK with a 2.5 inch lift. Both my Drag Link and Tie Rod have up and down movement probably caused by bad factory joints. The JK Wrangler HD Frame Brace and Drag Link Flip Kit is recomended for 4 inch and greater lifts. What would you recomend that I use to beef up my joints?
David