TJ Wrangler BellyUp Skid Plate

SKU: 4648403
The BellyUp increases your ground clearance by up to 2-3/8" inches by replacing the factory skid plate with a lower-profile heavy duty skid plate.
 
$476.99

Availability: In stock

 
 

Details

The BellyUp increases your ground clearance by up to 2-3/8" inches by replacing the factory skid plate with a lower-profile heavy duty skid plate. The BellyUp is manufactured with stronger and heavier materials than the stock plate to provide superior protection to your undercarriage. A one-inch body lift (Part #1948100) is recommended with Rubicon applications for proper transfer case clearance. Some exhaust adjustment may be necessary. Fits all TJ Wrangler models including the Rubicon and Unlimited. Note: This kit provides the maximum amount of ground clearance possible, but requires some fine tuning and adjustment to eliminate driveshaft vibration. Engine Spacer: This kit may require the use of a 5/8" engine spacer for proper fan shroud clearance when used with a 1" body lift. (Part #1948100) Short shaft kit: This kit will require the use of the TeraFlex short shaft kit (Part #4444400 or 4444401). Lowering kit: Because the BellyUP can make driveshaft angles severe, a lowering kit (Part #1900100 for a one-inch drop or Part #1900000 for 1/2" drop) will decrease the severity of that angle. This issue is common when the BellyUP is combined with an 4" suspension system.

Additional Information

Weight 79.0000
Installation Difficulty Moderate
Installation Time 3 hour avg.
Vehicle type Wrangler TJ Unlimited 04-06, Wrangler TJ 97-06
Video No

Service Parts for TJ Wrangler BellyUp Skid Plate

SKUNameShort Description
 

You may also be interested in...